R&S NRX, Getting Started

Page: 17 / 25

Instrument Tour
R&S
®
NRX
15 Getting Started 1424.7070.02 ─ 04
5 Instrument Tour
● Front Panel Tour ......................................................................................................15
● Rear Panel Tour ...................................................................................................... 19
5.1 Front Panel Tour
Figure 5-1: Front View of R&S NRX
1 = Module bay for optional connectors, see Chapter 5.1.2, "Module Bay" , on page 16.
2 = Sensor connectors A and B, see Chapter 5.1.1, "Sensor Connector A and B" , on page 15.
3 = Touchscreen, see Chapter 5.1.3, "Touchscreen" , on page 16.
4 = Keys, see Chapter 5.1.4, "Keys" , on page 16.
5 = Cursor block for scrolling in the menus, marking of parameters to be set and for numeric entries, see
Chapter 5.1.5, "Cursor Block" , on page 18.
6 = USB host interface, see Chapter 5.1.6, "USB Host Interface" , on page 18.
7 = On/standby key, see Chapter 5.1.7, "On/Standby Key" , on page 18.
5.1.1 Sensor Connector A and B
See (2) in Figure 5-1 .
Sensor connectors A and B are used to connect the R&S NRP power sensors and the
R&S NRQ6. For details on the supported power sensors, see the data sheet.
The complete functional range, including external trigger and reference clock for the
synchronization of connected sensors, is provided by these connectors.
Further information:
●
Chapter 4.8.1, "R&S NRPxxS/A/T and R&S NRQ6" , on page 13
●
Chapter 4.8.2, "R&S NRP
‑
Zxx" , on page 14
Front Panel Tour