R&S NRP Series, User Manual

Page: 34 / 161

Operating concepts
R&S
®
NRPxxA(N)
34 User Manual 1177.6017.02 ─ 08
The main dialog of the web user interface opens.
3. Select the "Continuous Average" tab and perform any necessary changes.
4. Press "Measurement > ON" to start the measurement.
For a detailed description of the web user interface, refer to Chapter 6, "Browser-based
user interface" , on page 40.
5.3 Remote control
You can remote control the R&S NRPxxA(N) easily. The change to remote control
occurs "on the fly" and has no influence on the manual operation.
Further information:
●
Chapter 9, "Remote control commands" , on page 58
●
Chapter 11, "Remote control basics" , on page 130
●
Chapter 11.1, "Remote control interfaces and protocols" , on page 130
●
Chapter 3.7.1, "Computer" , on page 16
5.4 R&S NRPV
The R&S NRPV enables you to measure power in all available measurement modes.
Also, you can use up to four power sensors simultaneously.
The R&S NRPV is provided on your documentation CD-ROM and on the
Rohde & Schwarz website as a separate standalone installation package.
Required equipment
●
R&S NRPxxA(N) power sensor
●
R&S NRP
‑
ZKU cable or an R&S NRP
‑
Z5 sensor hub and an R&S NRP
‑
ZK6 cable
to connect the sensor to the computer
●
Windows computer with installed:
R&S NRPV