manualshive.com logo in svg

R&S M3SR 4100 Series, Operating Manual

Share
Download
R&S M3SR 4100 Series Operating Manual Download Page 334

M3SR Series 4100

Channel List

3.218

Operating Manual 6175.4760.02 – 01

3.9.4.13

Channel List

Softkey

Softkey Type

Description

Editor

1.

Press 'Add Channel' softkey.

2.

Enter channel number.

3.

Press 'ENT' key to confirm.

Possible values:

All predefined channels that has at least one 
type of squelch set on.

Only predefined channels can be stored 
into the channel list.

1.

Choose channel from scanning channel 
list.

2.

Press 'Delete Channel' softkey.

3.

Press 'ENT' key to confirm.

Possible values:

All channel numbers that are previously added 
to the scanning list.

The softkey 'Delete Channel' is enabled 
only if there is at least one channel added 
to the channel list.

Activate

1.

Press 'Delete Channel List' softkey.

2.

Choose Yes or No to delete channel list.

3.

Press 'ENT' key to confirm.

The softkey 'Delete Channel List' is en-
abled only if there is at least one channel 
added to the channel list.

Summary of Contents for M3SR 4100 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands