R&S AREG800A, Getting Started

Page: 8 / 64

Safety and regulatory information
R&S
®
AREG800A
8 Getting Started 1179.3609.02 ─ 02
Meaning of safety labels
Safety labels on the product warn against potential hazards.
Potential hazard
Read the product documentation to avoid personal injury or product damage.
Heavy product
Be careful when lifting, moving or carrying the product. Carrying the product requires
a sufficient number of persons or transport equipment.
Electrical hazard
Indicates live parts. Risk of electric shock, fire, personal injury or even death.
Hot surface
Do not touch. Risk of skin burns. Risk of fire.
Protective conductor terminal
Connect this terminal to a grounded external conductor or to protective ground. This
connection protects you against electric shock if an electric problem occurs.
1.2 Labels on R&S AREG800A
Labels on the casing inform about:
●
Personal safety, see "Connecting to power" on page 7.
●
Product and environment safety, see Table 1-1 .
●
Identification of the product, see the serial number on the rear panel .
Table 1-1: Labels regarding R&S AREG800A and environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after
the product has come to the end of its service life. For more information, see the prod-
uct user manual, chapter "Disposal".
1.3 Warning messages in the documentation
A warning message points out a risk or danger that you need to be aware of. The
signal word indicates the severity of the safety hazard and how likely it will occur
if you do not follow the safety precautions.
Warning messages in the documentation