R&S AREG800A, Getting Started

Page: 47 / 64

Trying out the instrument
R&S
®
AREG800A
47 Getting Started 1179.3609.02 ─ 02
The bandwidth settings for an external frontend connected to board "A" are
applied.
6.2 Saving and recalling settings
To restore the results of our measurements later, we save the instrument settings
in a file.
To save the instrument settings in a file
We assume, a test configuration as described in Chapter 6.1, "Configuring static
operation setups" , on page 45.
1. Press the [Setup] key on the front panel.
2. In the "Setup" menu, select "Settings > Save/Recall".
3. In the "Save/Recall" dialog, select "Operation Mode > Save".
4. Select the "Filename" input field, use the on-screen keyboard, and enter
MyTestSignal .
Saving and recalling settings