R&S AREG800A, Getting Started

Page: 42 / 64

Instrument tour
R&S
®
AREG800A
42 Getting Started 1179.3609.02 ─ 02
5.2.3 DIG I/Q and RF connectors
3 5 4 6 2 9 8 7 1 10
Figure 5-6: Digital IO DD connectors and instrument boards
1 = Digital IO DD, page 42
2, 10 = Aux IF In, page 42
3, 9 = Aux IF Out, page 42
4, 8 = Aux IF Out, page 42
5, 7 = Tx IF In, page 43
6 = Four instrument boards "A" to "D" (4x R&S AREG8-B9)
Digital IO DD
Digital I/Q connectors "Digital IO DD 1" to "Digital IO DD 4" provided for future
use; one connector per instrument board (R&S
AREG8-B9).
Aux IF In
SMA female connectors "Aux IF In 1" and "Aux IF In 2" for input of an additional
interferer to the generated echo signal; two connectors per instrument board
(R&S
AREG8-B9).
How to: "To connect to SMA" on page 23
Aux IF Out
SMA female connectors "Aux IF Out 1" and "Aux IF Out 2" for output of IF signals
for signal analysis; two connectors per instrument board (R&S
AREG8-B9).
Rear panel tour