R&S AREG800A, Getting Started

Page: 22 / 64

Preparing for use
R&S
®
AREG800A
22 Getting Started 1179.3609.02 ─ 02
2. Connect the USB storage device to any of the USB connectors.
To connect a keyboard
► Connect the keyboard to any of the USB connectors.
When connected, the R&S AREG800A detects the keyboard automatically. A
detected keyboard has the default layout English – US.
To connect a mouse
► Connect the mouse to any of the USB connectors.
When connected, the R&S AREG800A detects the mouse automatically.
To connect power sensors
You can connect power sensors of the R&S NRP families to any of the USB con-
nectors.
See chapter "Using Power Sensors" in the user manual.
4.9 Connecting the R&S QAT100
The R&S AREG800A can generate radar signals when connected to an external
frontend, e.g. the R&S QAT100. This section provides information on relevant
connections between R&S AREG800A and the R&S QAT100.
To prepare for connecting
For the IF connection, the R&S AREG800A and the R&S QAT100 provide female
SMA connectors.
1. NOTICE! Damaged or not clean connections can lead to RF insertion loss
and mismatch, and even premature wear of the connectors.
Before connecting to the port, inspect the SMA connector visually to check
that it is clean, undamaged and mechanically compatible.
See the application note
1MA99 for information on how to handle and main-
tain the RF port, to minimize measurement deviations and ensure its longevity.
2. Make sure that the signal levels and DC components remain within the limits
as given in the data sheet.
Connecting the R&S QAT100