Page
24
of
24
RAD0172
R&G Racing
Unit
1, Shelley’s
Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
Bei Montage an Ducati Diavel 1260S 2019-2020
•
Entfernen Sie die Seitenverkleidungsteile für die Blinker gemäß der vorherigen Anleitung und
schneiden Sie die Kabelbinder, die die Verkabelung befestigen, um die Verkleidungsteile zu lösen
–
siehe
Abbildung 13
.
•
Sichern Sie den Kühlerschutz am Kühler mit 4 Kabelbindern vom Kit wie in
Abbildung 14
abgebildet.
•
Montieren Sie die Seitenverkleidungsteile wieder, und die Blinker für die Kabel mit den übrigen 4
Kabelbinder wieder ordentlich anbringen.
•
Überprüfen Sie, dass alle Schrauben ordnungsgemäß angezogen sind und alle Verkleidungsteile
sicher befestigt sind, bevor Sie mit dem Motorrad fahren.
AUSGABE 4
–
14/05/2021 (AO)
CONSUMER NOTICE
The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may
make design changes which do not diminish their performance or visual appeal and supplying them in such state
shall conform to the order. The Buyer acknowledges no representation or warranty (other than as to title) has
been given or will apply to the Products other than those in R
&G’s
order or confirmation and the Buyer confirms it
has chosen the Products as being of merchantable quality and suitable for its particular purposes. Where R&G fits
the Products or undertakes other services it shall exercise reasonable skill and care and rectify any fault free of
charge unless the workmanship has been disturbed. The Buyer is responsible for ensuring that the warranty on
the motorcycle is not affected by the fitting of the Products. On return of any defective Products R&G shall at its
option either supply a replacement or refund the purchase money but shall not be liable if the Products have been
modified or used or maintained otherwise than in
accordance with R&G’s or
manufactur
er’s i
nstructions and good
engineering practice or if the defect arises from accident or neglect. Other than identified above and subject to
R&G not limiting its liability for causing death and personal injury, it shall not be liable for indirect or consequential
loss and otherwise its liability shall be limited to the amounts paid by the Buyer for the Products or the fitting or
service concerned. These terms do not affect the Buy
er’s
statutory rights.
R&G RACING RETURNS POLICY (NON-FAULTY GOODS)
Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned
direct to us if they were purchased direct from us (customer must prove if necessary). Otherwise to be returned
to original vendor. Goods must be in re-sellable condition, in the opinion of R&G Racing. All returns are subject to
a 25% restocking and handling fee (25% of the gross value exc. P&P
–
at the prevailing price at time of
purchase). The customer must pay any and all carriage charges. No returns of discontinued products, unless
within 14 days of purchase. This policy does not affect your statutory rights and does not
refer to faulty goods.
