LP0192
R&G Racing
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
Email:
8
Page | 8
PICTURE 33
PICTURE 34
PICTURE 35
PICTURE 36
FITTING INSTRUCTIONS
PLEASE NOTE TO FIT THIS PRODUCT YOU WILL HAVE TO REMOVE A TAMPER-PROOF
BOLT FOR WHICH A TOOL AND KEY IS SUPPLIED IN KIT (ITEMS 11 AND 12).
Remove the panniers, rider and pillion seats.
Remove the two bolts arrowed in picture 1.
Remove the two bolts arrowed in pictures 2 and 3, the remove both pannier mounting
brackets.
Remove the four bolts arrowed in pictures 4 and 5.
Carefully remove the rear sub-frame cowl.
To remove the original licence plate bracket and access the wiring it is easier to achieve
this by removing the tamper-proof bolt arrowed in picture 6.
Remove the tamper-proof bolt use the tool provided (item 11), place the tool over the bolt
head ensuring the locking screws are aligned with the thickest section of the bolt head and
tighten the locking screws using the Allen key provided (item 12).
Using a socket or spanner on the tool loosen and remove the bolt (if this fails the bolt may
be removed by carefully drilling the head of the bolt).
Disconnect the three wiring plug sockets arrowed in picture 8.
Remove the four bolts arrowed in picture 9.
Remove the two bolts arrowed in picture 10.