RAMMER 455, Original Instructions Manual

Page: 25 / 60

Operation - Page 25 COPYRIGHT © 2013 SANDVIK MINING AND CONSTRUCTION OY
Operation 455
5. Place the tool against the object at a 90 degree angle. Avoid small irregularities
on the object which will break easily and cause either idle strokes or an
incorrect working angle.
6. When demolishing vertical structures (e.g. brick walls), place the tool against
the wall at a 90 degree angle.
7. Start the hammer.
8. A safety screen is recommended to protect the operator from flying debris.
Keep the cabin windows and doors closed during operation.
;
;
;
;
;
;