RAMMER 455, Original Instructions Manual

Page: 20 / 60

COPYRIGHT © 2013 SANDVIK MINING AND CONSTRUCTION OY Page 20 - Operation
Safety 455
Keep the safety labels clean and visible at all times. Check the condition of safety
labels daily. Safety labels and instructions which have disappeared, been damaged,
painted over, come loose or do not meet the legibility requirements for safe viewing
distance, must be replaced before operating the product.
If a safety label is attached to a part that is replaced, install a new safety label on the
replacement part. If this manual is available in your language, then the safety labels
should be available in the same language.
There are several specific safety labels on this hammer. Please become familiarized
with all safety labels. The location of the safety labels is shown in the illustration
below.
When you clean the safety labels, use a cloth, water and soap. Do not use solvent,
gasoline or other harsh chemicals to clean the safety labels.
Solvents, gasoline or harsh chemicals could loosen the adhesive that secures the
safety labels. Loose adhesive will allow the safety label to fall.
R010413
IGNORING
INSTRUCTIONS HAZARD
Faulty handling practice could
cause death or severe injury.
Read and follow the instructions
in the operator’s manual.
WARNING
169410_ENG-3
DUST HAZARD
Breathing dust will cause death
or severe injury.
Always wear approved
respirator.
DANGER
169410_ENG-1
FLYING OBJECTS HAZARD
Fragments fly up to 40 m (130 ft)
and could cause death or severe
injury.
Stop operation when a
person enters hazard zone.
Wear approved personal
protective equipment.
WARNING
169410_ENG-2
NOISE HAZARD
Continuous exposure to noise
above 80 dB(A) could cause
hearing impairment.
Wear approved hearing
protectors.
WARNING
169410_ENG-4
169400_ENG-9
HIGH PRESSURE HAZARD
Improper handling of pressurized
accumulator will cause death or
severe injury.
Read workshop manual before
disassembly.
Release pressure before disassembly.
Recharge with nitrogen (N
2
) only.
DANGER
Hydraulic Hammer
Model:
Serial Number:
Hammer weight:
Min. working weight:
Operating pressure:
Oil flow:
Manufactured:
Version:
kg
kg
bar
l/min
Manufacturer:
Address:
Sandvik Mining and
Construction Oy
Taivalkatu 8, 15170 Lahti, Finland