RAM Truck Gas 2012 Owner'S Manual Download Page 158 | Manualshive

Page: 158 / 500

background image

Windshield Washers

To use the windshield washer, push the washer knob,
located on the end of the multifunction lever, inward to
the second detent. Washer fluid will be sprayed and the
wiper will operate for two to three cycles after the washer
knob is released from this position. If the washer knob is
depressed while in the delay range, the wiper will
operate for several seconds after the washer knob is
released. It will then resume the intermittent interval
previously selected. If the washer knob is pushed while
in the off position, the wiper will turn on and cycle
approximately three times after the wash knob is re-
leased.

To prevent freeze-up of your windshield washer system
in cold weather, select a solution or mixture that meets or
exceeds the temperature range of your climate. This
rating information can be found on most washer fluid
containers.

WARNING!

Sudden loss of visibility through the windshield
could lead to a collision. You might not see other
vehicles or other obstacles. To avoid sudden icing of
the windshield during freezing weather, warm the
windshield with the defroster before and during
windshield washer use.

Mist Feature

When a single wipe to clear off road mist or spray from
a passing vehicle is needed, push the washer knob,
located on the end of the multifunction lever, inward to
the first detent and release. The wipers will cycle one
time and automatically shut off.

NOTE:

The mist feature does not activate the washer

pump; therefore, no washer fluid will be sprayed on the
windshield. The wash function must be used in order to
spray the windshield with washer fluid.

156

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
156
157
158
159
160
...
»

Summary of Contents for Truck Gas 2012





















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Truck Gas 2012

Brand: Camcar Pages: 6

MARTEN-FREE CAR

Brand: Gardigo Pages: 36

Brand: Harmar Mobility Pages: 10

AUDI 4G HIGHEND

Brand: KAP Pages: 20

CK 3000 Evolution

Brand: Parrot Pages: 2

Brand: UltraGauge Pages: 55

WrapAround Windjammer

Brand: Bestop Pages: 7

Brand: BMW Pages: 21

Brand: AddSecure Pages: 14

Brand: Flash Cover Pages: 2

Brand: ideus Pages: 159

Brand: Pyle Pages: 2

Brand: RAM Pages: 148

Brand: Hamron Pages: 36

Brand: Rugged Ridge Pages: 5

Brand: Prorack Pages: 13

Omni-Bike Sport Ducato

Brand: OMNISTOR Pages: 5

Brand: Sintrones Pages: 55

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands