RAM Truck Gas 2012 Owner'S Manual Download Page 170

Page: 170 / 500

The key symbol indicates that this outlet can supply
power when the key is in the ON or ACC positions.

All accessories connected to the outlet(s) should be
removed or turned off when the vehicle is not in use to
protect the battery against discharge.

WARNING!

To avoid serious injury or death:

•

Only devices designed for use in this type of
outlet should be inserted into any 12 Volt outlet.

•

Do not touch with wet hands.

•

Close the lid when not in use and while driving
the vehicle.

•

If this outlet is mishandled, it may cause an
electric shock and failure.

Power Outlet Fuse Locations

1 — M7 Fuse 20 A Yellow Power Outlet Center Seat (Opt) or

with Console Rear
2 — M6 Fuse 20 A Yellow Cigar Lighter Instrument Panel or

with Console Front
3 — M36 Fuse 20 A Yellow Power Outlet Instrument Panel or

with Console Center

168

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for Truck Gas 2012





















































































































































































































































































































































































































































































































Search results

Summary of Contents for Truck Gas 2012

Reviews:

Related manuals for Truck Gas 2012

Brands by name

Popular brands

RAM Truck Gas 2012, Owner'S Manual

Search results

Summary of Contents for Truck Gas 2012

Reviews:

Related manuals for Truck Gas 2012

Brands by name

Popular brands