RAM Truck Gas 2012 Owner'S Manual Download Page 356 | Manualshive

Page: 356 / 500

background image

Manual Brake Control Lever

Slide the manual brake control lever to the right to
activate power to the trailer’s electric brakes independent
of the tow vehicle’s brakes. If the manual brake control
lever is activated while the brake is also applied, the
greater of the two inputs determines the power sent to
the trailer brakes.

The trailer and the vehicle’s brake lamps will come on
when either vehicle braking or manual trailer brakes are
applied.

Trailer Brake Status Indicator Light

This light indicates the trailer electrical connection status.

If no electrical connection is detected after the ignition is
turned on, pressing the GAIN adjustment button or
sliding the manual brake control lever will display the
GAIN setting for 10 seconds and the “Trailer Brake Status
Indicator Light” will not be displayed.

If a fault is detected in the trailer wiring or the Integrated
Trailer Brake Module (ITBM), the “Trailer Brake Status
Indicator Light” will flash.

GAIN Adjustment Buttons (+/-)

Pressing these buttons will adjust the brake control
power output to the trailer brakes in 0.5 increments. The
GAIN setting can be increased to a maximum of 10 or
decreased to a minimum of 0 (no trailer braking).

GAIN

The GAIN setting is used to set the trailer brake control
for the specific towing condition and should be changed
as towing conditions change. Changes to towing condi-
tions include trailer load, vehicle load, road conditions
and weather.

Adjusting GAIN

NOTE:

This should only be performed in a traffic free

environment at speeds of approximately 20–25 mph
(30–40 km/h).

354

STARTING AND OPERATING

«
...
354
355
356
357
358
...
»

Summary of Contents for Truck Gas 2012





















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Truck Gas 2012

Brand: AC Schnitzer Pages: 16

Brand: Taffio Pages: 8

SmartDiag2GO GD201-O

Brand: OCTO Pages: 5

Brand: Cargo Floor Pages: 16

Brand: Axxess Pages: 8

Brand: Cadillac Pages: 518

Brand: Opel Pages: 141

Brand: Toyota Pages: 52

Brand: Thule Pages: 8

Brand: Voxoa Pages: 48

Brand: BMW Pages: 189

Brand: Honda Pages: 22

Brand: Mercedes-Benz Pages: 494

PRIME DESIGN HRR3-E-PM42

Brand: Safe Fleet Pages: 12

Brand: N.R. AUTOSEATS Pages: 8

Brand: Cadillac Pages: 19

Brand: Mazda Pages: 1001

Brand: SAAS Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands