RAM Truck Gas 2012 Owner'S Manual Download Page 264 | Manualshive

Page: 264 / 500

background image

•

When occupants in the vehicle select an Auto mode
operation, Auto blower operation is set by using rotary
knobs on the control unit and a comfort temperature
setting by using the temperature up and down but-
tons.

•

The system provides set-and-forget operation for op-
timum comfort and convenience.

•

The system can be controlled manually, if desired.

•

SYNC feature links the temperature controls, the pas-
senger side temperature becomes the same as the
temperature selected by the driver.

The ATC system automatically maintains the interior
comfort level desired by the driver and all passengers.

Automatic Temperature Control (ATC) Panel

1 - Blower Control

9 - DEFROST

2 - Left Temperature Up

10 - Right Temperature Down

3 - SYNC Indicator

11 - A/C

4 - Left Temperature Indicator

12 - A/C Indicator

5 - Right Temperature

Indicator

13 - SYNC Temperature Button

6 - DELAY Indicator

14 - Left Temperature Down

7 - Right Temperature Up

15 - RECIRCULATE

8 - MODE

262

UNDERSTANDING YOUR INSTRUMENT PANEL

«
...
262
263
264
265
266
...
»

Summary of Contents for Truck Gas 2012





















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Truck Gas 2012

Brand: Daihatsu Pages: 340

Brand: Vauxhall Pages: 177

10-8002-C11998B

Brand: Saleen Pages: 12

2013 Buick Verano

Brand: Buick Pages: 5

Brand: TBC Pages: 12

Brand: Tessera4x4 Pages: 20

Brand: MAXWORKS Pages: 7

Brand: Renault Pages: 238

Brand: Hummer Pages: 502

Challenger 2013

Brand: Dodge Pages: 543

Brand: MULTILIFT Pages: 62

Brand: Draw tite Pages: 4

Brand: EFILive Pages: 25

Brand: Motoalliance Pages: 5

Brand: Skoda Pages: 324

Brand: Honda Pages: 569

Brand: TOPPOINT Pages: 2

Brand: Xingyun Pages: 74

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands