RAM 2014 RAM PROMASTER, Supplement Manual

Page: 56 / 128

MESSAGE DESCRIPTION
Shift Not Allowed This message appears, together with a warning buzzer, when the system
will not allow a gear change requested by the driver (for example, that
would cause engine overspeed or transmission damage).
This message may also appear when starting the engine at low tempera-
ture. In this case the Automated Manual transmission isn’t able to engage
first gear, in this situation either use the engine block heater or allow the
engine to idle in NEUTRAL (N) until the transmission has warmed.
Press Brake Pedal And Try Again This message appears accompanied, in some cases, by a warning buzzer,
if you attempt to change gear with the vehicle parked without pressing
the brake pedal.
To shift the transmission (with key on/engine off), press and hold the
brake pedal, move the shift lever to NEUTRAL (N), then move the shift
lever to the desired position.
54 STARTING AND OPERATING