6. Check that the oil pressure warning light has turned
off.
7. Release the parking brake.
To start the engine if the transmission is faulty, the
“Delayed startup” procedure may be required.
NOTE:
Not all Transmission Failures requires the “De-
layed startup” Procedure, it depends on the type of
failure.
(refer to
⬙
Instrument Cluster Messages
⬙
under
⬙
Auto-
mated Manual Transmission
⬙
in this section for further
information):
•
Begin with the key in the OFF position.
•
Press and hold the brake pedal.
•
Turn the key to the START/AVV position and hold it
there for at least seven seconds with the brake de-
pressed. The engine will start, and the transmission
will operate in recovery mode (maximum gear permit-
ted = 3rd, automatic mode not available). If the engine
does not start, contact your authorized dealer.
Starting Fluids
The engine is equipped with a glow plug preheating
system. If the instructions in this manual are followed,
the engine should start in all conditions and no type of
starting fluid should be used.
5
STARTING AND OPERATING
33
Summary of Contents for 2014 RAM PROMASTER
