RAM 2014 RAM PROMASTER, Supplement Manual

Page: 48 / 128

•
Before and after the engine is started, you may hear a
hydraulic pump for a short period of time. This noise
is normal and will not damage the transmission.
•
During extremely cold temperatures, the transmission
will not operate if the oil temperature is -22°F (-30°C) or
below. When transmission actuation oil temperature is
lower than -22°F (-30°C), engine start will not be allowed
by PCM. For this reason the block heater is recommended
below -17°F (-27°C). Normal operation will resume once
the transmission temperature has risen to a suitable level.
Manual (M) (Manual Mode)
In the MANUAL (M) position the driver is responsible
for choosing the best gear ratio to engage, depending on
driving conditions.
NOTE: Do not press the brake and accelerator pedals at
the same time. Use only one foot to operate the brake and
accelerator.
To operate in MANUAL (M) mode:
•
Press and hold the brake pedal.
•
Move the shift lever to the MANUAL (M) position.
The current gear will be displayed in the EVIC.
•
To drive, release the brake pedal and press the accel-
erator pedal.
•
Tap the shift lever towards the (+) to engage a higher
gear.
•
Tap the shift lever towards the (–) position to engage a
lower gear.
•
The accelerator pedal need not be released during gear
changes in MANUAL mode.
•
You can shift between DRIVE (D) and MANUAL (M)
positions at any speed, without taking your foot off the
accelerator pedal.
46 STARTING AND OPERATING