manualshive.com logo in svg

RAM Commercial Promaster City 2016, Owner'S Manual

The RAM Commercial Promaster City 2016 is a versatile and reliable vehicle designed to meet the needs of businesses and commercial applications. To ensure a seamless driving experience, it is crucial to have the Owner's Manual handy, guiding you through its features and maintenance. You can conveniently download the comprehensive manual for free from manualshive.com, unlocking the full potential of your Promaster City.

Share
Download
background image

CAUTION!

•

Mixing of engine coolant (antifreeze) other than
specified Organic Additive Technology (OAT) en-
gine coolant (antifreeze), may result in engine
damage and may decrease corrosion protection.
Organic Additive Technology (OAT) engine cool-
ant is different and should not be mixed with
Hybrid Organic Additive Technology (HOAT) en-
gine coolant (antifreeze) or any “globally compat-
ible” coolant (antifreeze). If a non-OAT engine
coolant (antifreeze) is introduced into the cooling
system in an emergency, the cooling system will
need to be drained, flushed, and refilled with fresh
OAT coolant (conforming to MS.90032), by an au-
thorized dealer as soon as possible.

•

Do not use water alone or alcohol-based engine
coolant (antifreeze) products. Do not use additional

(Continued)

CAUTION!

(Continued)

rust inhibitors or antirust products, as they may not
be compatible with the engine coolant and may
plug the radiator.

•

This vehicle has not been designed for use with
propylene glycol-based engine coolant (antifreeze).
Use of propylene glycol-based engine coolant (an-
tifreeze) is not recommended.

Adding Coolant

Your vehicle has been built with an improved engine
coolant (OAT coolant conforming to MS.90032) that al-
lows extended maintenance intervals. This engine cool-
ant (antifreeze) can be used up to ten years or 150,000
miles (240,000 km) before replacement. To prevent reduc-
ing this extended maintenance period, it is important that
you use the same engine coolant (OAT coolant conform-
ing to MS.90032) throughout the life of your vehicle.

366

MAINTAINING YOUR VEHICLE

Summary of Contents for Promaster City 2016





















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Promaster City 2016

iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
PAC RadioPRO 5 RP5-GM41 Quick Start Manual preview
RadioPRO 5 RP5-GM41
Brand: PAC Pages: 3
Tamiya KO PROPO RTF 2002 ESC Manual preview
KO PROPO RTF 2002 ESC
Brand: Tamiya Pages: 2
Axxess AX-LR904 Installation Instructions Manual preview
AX-LR904
Brand: Axxess Pages: 8
SeaSucker SX6150 Quick Start Manual preview
SX6150
Brand: SeaSucker Pages: 9
Whispbar K611W Fitting Instructions Manual preview
K611W
Brand: Whispbar Pages: 77
P-Invent Troller User Manual preview
Troller
Brand: P-Invent Pages: 4
Yutrax TX107 Operator'S Manual preview
TX107
Brand: Yutrax Pages: 8
Yakima Prorack K436 Fitting Instructions Manual preview
Prorack K436
Brand: Yakima Pages: 13
Power Acoustik METER 4 Installation preview
METER 4
Brand: Power Acoustik Pages: 4
Subaru 1994 Impreza Supplemental Service Manual preview
1994 Impreza
Brand: Subaru Pages: 540
Dometic LMC Eriba Nova Service Manual preview
LMC Eriba Nova
Brand: Dometic Pages: 24
Ford F-250 Super Duty 2022 Owner'S Manual preview
F-250 Super Duty 2022
Brand: Ford Pages: 740
Jaeger 12160509J Fitting Instructions Manual preview
12160509J
Brand: Jaeger Pages: 16
Volvo 30795637 User Manual preview
30795637
Brand: Volvo Pages: 92
TracRac TracONE Installation Instructions Manual preview
TracONE
Brand: TracRac Pages: 8
Ford 2003 Ranger Quick Reference Manual preview
2003 Ranger
Brand: Ford Pages: 2
Toyota 4Runner 2020 Owner'S Manual preview
4Runner 2020
Brand: Toyota Pages: 596

Brands by name

Popular brands

Load more brands