RAM Commercial Promaster City 2016 Owner'S Manual Download Page 183

Page: 183 / 436

8. Push the

MENU

button briefly to return to the menu

screen or hold the

MENU

button down to return to the

standard screen without storing.

The setting will increase or decrease by one unit each
time the

DOWN

arrow button is pushed.

Hold down the button to increase/decrease the setting
rapidly and automatically. Complete the adjustment
when you approach the desired value.

When you select “Mode”, pushing the

MENU

button

makes the mode flash on the display.

1. Push

DOWN

arrow button to select

⬙

24h

⬙

12h

⬙

2. When you have made the required settings, push the

MENU

button briefly to go back to the submenu

screen or hold the button down to go back to the main
menu screen without saving.

3. Hold the

MENU

button down again to return to the

standard screen or to the main menu according to
where you are in the menu.

Set Date

With this function, it is possible to set the date.

To adjust the date:

1. Push the

MENU

button; the “year” will flash on the

display.

2. Push and release the

DOWN

arrow

button to adjust.

3. Push the

MENU

button; the “month” will flash on the

display.

4. Push and release the

DOWN

arrow

button to adjust.

5. Push the

MENU

button; the “day” will flash on the

display.

UNDERSTANDING YOUR INSTRUMENT PANEL

181

Summary of Contents for Promaster City 2016





















































































































































































































































































































































































































































Search results

Summary of Contents for Promaster City 2016

Reviews:

Related manuals for Promaster City 2016

Brands by name

Popular brands

RAM Commercial Promaster City 2016, Owner'S Manual

Search results

Summary of Contents for Promaster City 2016

Reviews:

Related manuals for Promaster City 2016

Brands by name

Popular brands