RAM Commercial Promaster City 2016 Owner'S Manual Download Page 185

Page: 185 / 436

To set the required unit of measurement:

1. Push the

MENU

button to display the three sub-

menus.

2. Push and release the

DOWN

arrow

button to navigate through the three submenus.

3. Select the required option and then push the

MENU

button.

4. If selecting the

⬙

Distance

⬙

submenu, briefly push the

MENU

button and the display will show “mi” or

⬙

depending on the previous setting.

5. Push and release the

DOWN

arrow

button to select.

When you select the “Consumption” submenu: briefly
pushing the

MENU

button makes “mpg” or “km/l”

appear on the display, depending on the previous setting.

1. If the set distance unit of measurement is

⬙

(km) the

fuel consumption unit will be displayed in

⬙

mpg

⬙

(km/l or l/100 km).

2. Push and release the

DOWN

arrow

button to select.

When you select the

⬙

Temperature

⬙

submenu: briefly

pushing the

MENU

button the display will show

⬙

°C

⬙

°F

⬙

depending on the previous setting.

1. Push and release the

DOWN

arrow

button to select.

2. When you have made the required settings, push the

MENU

button briefly to go back to the submenu

screen or hold the

MENU

button down to go back to

the main menu screen without saving.

3. Hold the

MENU

button down again to return to the

standard screen or to the main menu according to
where you are in the menu.

UNDERSTANDING YOUR INSTRUMENT PANEL

183

Summary of Contents for Promaster City 2016





















































































































































































































































































































































































































































Search results

Summary of Contents for Promaster City 2016

Reviews:

Related manuals for Promaster City 2016

Brands by name

Popular brands

RAM Commercial Promaster City 2016, Owner'S Manual

Search results

Summary of Contents for Promaster City 2016

Reviews:

Related manuals for Promaster City 2016

Brands by name

Popular brands