RAM Commercial CHASSIS CAB 2020 Owner'S Manual Download

Page: 95 / 516

GETTING TO KNOW YOUR INSTRUMENT PANEL

The system allows the driver to select informa

tion by pushing the following instrument cluster

display control buttons located on the left side

of the steering wheel:

Instrument Cluster Display Control Buttons



Up Arrow Button

Push and release the up arrow

button to scroll upward through the

main menu items, submenu

screen, and vehicle settings.



Down Arrow Button

Push and release the down arrow

button to scroll downward through

the main menu items, submenu

screen, and vehicle settings.



Right Arrow Button

Push and release the right arrow

button to access/select the infor

mation screens or submenu

screens of a main menu item. Push

and hold the RIGHT arrow button for two

seconds to reset displayed/selected features

that can be reset.



Left Arrow Button

Push and release the left arrow

button to access/select the infor

mation screens, submenu screens

of a main menu item, or to return to

the main menu.

Oil Life Reset

Your vehicle is equipped with an engine oil

change indicator system. The “Oil Change

Required” message will display in the instru

ment cluster display after a single chime has

sounded, to indicate the next scheduled oil

change interval. The engine oil change indicator

system is duty cycle based, which means the

engine oil change interval may fluctuate, depen

dent upon your personal driving style.

NOTE:

Use the steering wheel instrument cluster

display controls for the following procedure.

Oil Life Reset Procedure

1. Without pushing the brake pedal, push the

ENGINE START/STOP button and place the

ignition to the ON/RUN position (do not

start the engine).

2. Push and release the down arrow button to

scroll downward through the main menu to

“Vehicle Info.”

3. Push and release the right arrow button to

access the ”Vehicle Info” screen, then scroll

up or down to select “Oil Life.”

4. Push and hold the right arrow button to

select “Reset”.

5. Push and release the down arrow button to

select “Yes,” then push and release the

right arrow button to reset the Oil Life to

100%.

6. Push and release the up arrow button to exit

the instrument cluster display screen.

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 93

Summary of Contents for CHASSIS CAB 2020





































































































































































































































































































































































































































































































































Search results

Summary of Contents for CHASSIS CAB 2020

Reviews:

Related manuals for CHASSIS CAB 2020

Brands by name

Popular brands

RAM Commercial CHASSIS CAB 2020, Owner'S Manual

Search results

Summary of Contents for CHASSIS CAB 2020

Reviews:

Related manuals for CHASSIS CAB 2020

Brands by name

Popular brands