RAM Commercial CHASSIS CAB 2020 Page 156 Owner'S Manual Download

Page: 156 / 516

154

SAFETY

Knee Impact Bolsters

The Knee Impact Bolsters help protect the

knees of the driver and front passenger, and

position the front occupants for improved inter

action with the front air bags.

Supplemental Side Air Bags

Supplemental Seat-Mounted Side Air Bags

(SABs) — If Equipped
Your vehicle may be equipped with Supple

mental Seat-Mounted Side Air Bags (SABs). If

your vehicle is equipped with Supplemental

Seat-Mounted Side Air Bags (SABs), please

refer to the information below.

Supplemental Seat-Mounted Side Air Bags

(SABs) are located in the outboard side of the

front seats. The SABs are marked with “SRS

AIRBAG” or “AIRBAG” on a label or on the seat

trim on the outboard side of the seats.

Supplemental Seat-Mounted Side Air Bag Label

The SABs (if equipped with SABs) may help to

reduce the risk of occupant injury during certain

side impacts, in addition to the injury reduction

potential provided by the seat belts and body

structure.

When the SAB deploys, it opens the seam on

the outboard side of the seatback’s trim cover.

The inflating SAB deploys through the seat

seam into the space between the occupant and

the door. The SAB moves at a very high speed

and with such a high force that it could injure

occupants if they are not seated properly, or if

items are positioned in the area where the SAB

inflates. Children are at an even greater risk of

injury from a deploying air bag.

Supplemental Side Air Bag Inflatable Curtains

(SABICs) — If Equipped
Your vehicle may be equipped with Supple

mental Side Air Bag Inflatable Curtains

(SABICs). If your vehicle is equipped with

Supplemental Side Air Bag Inflatable Curtains

(SABICs), please refer to the information below.

WARNING!



Do not drill, cut, or tamper with the knee

impact bolsters in any way.



Do not mount any accessories to the knee

impact bolsters such as alarm lights,

stereos, citizen band radios, etc.

WARNING!

Do not use accessory seat covers or place

objects between you and the Side Air Bags;

the performance could be adversely affected

and/or objects could be pushed into you,

causing serious injury.

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 154

Summary of Contents for CHASSIS CAB 2020





































































































































































































































































































































































































































































































































Search results

Summary of Contents for CHASSIS CAB 2020

Reviews:

Related manuals for CHASSIS CAB 2020

Brands by name

Popular brands

RAM Commercial CHASSIS CAB 2020, Owner'S Manual

Search results

Summary of Contents for CHASSIS CAB 2020

Reviews:

Related manuals for CHASSIS CAB 2020

Brands by name

Popular brands