RAM Commercial CHASSIS CAB 2020 Page 217 Owner'S Manual Download

Page: 217 / 516

STARTING AND OPERATING

215

(Continued)

The following indicators should be used to

ensure that you have properly engaged the

transmission into the PARK position:



Look at the transmission gear position

display and verify that it indicates the PARK

position (P), and is not blinking.



With brake pedal released, verify that the

gear selector will not move out of PARK.

REVERSE (R)
This range is for moving the vehicle backward.

Shift into REVERSE only after the vehicle has

come to a complete stop.



Unintended movement of a vehicle could

injure those in or near the vehicle. As with

all vehicles, you should never exit a vehicle

while the engine is running. Before exiting a

vehicle, always come to a complete stop,

then apply the parking brake, shift the

transmission into PARK, and turn the igni

tion OFF. When the ignition is in the OFF

mode, the transmission is locked in PARK,

securing the vehicle against unwanted

movement.



When exiting the vehicle, always make sure

the ignition is in the OFF mode, remove the

key fob from the vehicle, and lock the

vehicle.



Never leave children alone in a vehicle, or

with access to an unlocked vehicle.

Allowing children to be in a vehicle unat

tended is dangerous for a number of

reasons. A child or others could be seriously

or fatally injured. Children should be

warned not to touch the parking brake,

brake pedal or the transmission gear

selector.

WARNING!

(Continued)



Do not leave the key fob in or near the

vehicle (or in a location accessible to chil

dren), and do not leave the ignition in the

ACC or ON/RUN mode. A child could

operate power windows, other controls, or

move the vehicle.

CAUTION!



DO NOT race the engine when shifting from

PARK or NEUTRAL into another gear range,

as this can damage the drivetrain.



Before moving the transmission gear

selector out of PARK, you must start the

engine, and also press the brake pedal.

Otherwise, damage to the gear selector

could result.

WARNING!

(Continued)

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 215

Summary of Contents for CHASSIS CAB 2020





































































































































































































































































































































































































































































































































Search results

Summary of Contents for CHASSIS CAB 2020

Reviews:

Related manuals for CHASSIS CAB 2020

Brands by name

Popular brands

RAM Commercial CHASSIS CAB 2020, Owner'S Manual

Search results

Summary of Contents for CHASSIS CAB 2020

Reviews:

Related manuals for CHASSIS CAB 2020

Brands by name

Popular brands