RAM Commercial CHASSIS CAB 2020 Owner'S Manual Download

Page: 175 / 516

SAFETY

173

Frequently Asked Questions About Installing Child Restraints With Seat Belts

What is the weight limit (child’s

weight of the child

restraint) for using the Tether

Anchor with the seat belt to attach

a forward facing child restraint?

Weight limit of the Child Restraint

Always use the tether anchor when

using the seat belt to install a

forward facing child restraint, up to

the recommended weight limit of

the child restraint.

Can the rear-facing child restraint

touch the back of the front

passenger seat?

Yes

Contact between the front

passenger seat and the child

restraint is allowed, if the child

restraint manufacturer also allows

contact.

Can the rear head restraints be

removed?

Yes

The head restraints can be

removed in every rear seating

position if they interfere with the

installation of the child restraint.

Refer to “Head Restraints” in

“Getting To Know Your Vehicle” for

further information.

Can the buckle stalk be twisted to

tighten the seat belt against the

belt path of the child restraint?

Yes – Cinching Latch Plate

No – ALR

In positions with cinching latch

plates (CINCH), the buckle stalk

may be twisted up to 3 full turns.

Do not twist the buckle stalk in a

seating position with an ALR

retractor.

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 173

Summary of Contents for CHASSIS CAB 2020





































































































































































































































































































































































































































































































































Search results

Summary of Contents for CHASSIS CAB 2020

Reviews:

Related manuals for CHASSIS CAB 2020

Brands by name

Popular brands

RAM Commercial CHASSIS CAB 2020, Owner'S Manual

Search results

Summary of Contents for CHASSIS CAB 2020

Reviews:

Related manuals for CHASSIS CAB 2020

Brands by name

Popular brands