Documentation Center
Figure 4: RAK10701-P power up successful
Figure 5: GPS error on boot up sequence
3. After the successful boot-up, the main home screen will be shown. Take note, that there will be no data at the
first start of the device.
📝
NOTE:
The field tester must be outside and has a clear view of the sky to get GPS coordinates. The GPS antenna
is located on top of the device beside the RP-SMA connector of the LoRa Antenna.
If you are indoors, there will be no reception of the GPS signal. The latitude and longitude data will be
empty.
Figure 6: RAK10701-P Main Page waiting for valid data
4. Once fully powered on, the external button at the side can sleep or wake up the display on the LCD screen via a
single press on it.
5. If the device is connected via USB-C to a computer, then the button is pressed, it will not remove the display but
will lock the screen (touch screen behavior is disabled).