RAK Mobile Filling Station, Operation Manual

Page: 44 / 70

Copyright 2020, Al-Rakeb Oil, Electricity & Construction Services Company | Kuwait
44
•
The wide arrows located at the left and right side of the monitor is to silent and ignore any
alarm notification
•
If the operator is willing to go back to the main menu, the operator shall press the button
labeled with the number 2 in figure 37.
•
To shut down the monitor press the “info” button labeled with the number 3 in figure 37.
And then press the “shutdown” button labeled in figure 38.
•
Do not forget to switch off the switch located at the bottom of the console “OFF 0”
Figure 38. Info Button menu.
3.6.4.2 Digimon Console
•
The Digimon console will start automatically whenever the MFS is connected to a power
source.
•
Once the console is on it will show the page shown in figure 39.
•
The arrows at the top labeled with number 1 are used to navigate between tanks.
•
The monitor arrows are not pushed they are activated via touch. Make sure the LED next
to the arrow will lit with green to ensure that the touch navigation is working while clicking.
•
Whenever the page is on the tank needed to be monitored, the arrows located at the bottom
of the screen labeled with the number 2 in figure 39 are used to go over all pages that shows
the tank detailed status. Those detailed status pages are shown in table 10.