10
06.14
Josef Kihlberg a.560PN22
7
PREVENTIVE AND CORRECTIVE MAINTENANCE
7.1 CLEANING THE STAPLER
This stapler does not require special servicing. It only
needs regular cleaning with a non-aggressive (non-
corrosive) cleaner agent. Do not remove any parts for
cleaning purposes!
Check the proper functioning of all safety
devices daily. Make especially sure that:
– the trigger works smoothly,
– all screws and nuts are securely tightened.
– the stapler is regularly lubricated (refer to chapter
5.2).
Before all maintenance tasks on the
stapler always first disconnect it from
the air supply.
To remove a staple which has become jammed:
– Unscrew the six screws at the rear body (Fig 9).
– Remove rear body and the defective staple
(Fig 10).
– Assemble in the opposit way.
7.2 REMOVING JAMMED STAPLES
Fig. 10
Fig. 9
