RAIS Nexo 100, Installation Manual

Page: 58 / 94

STARTING THE GAS FIREPLACE
Lighting for first time
See the separate user manual for how to use the remote control .
Before lighting the fire for the first time, ensure that all of the packaging, labels etc . are removed from the
fireplace and the glass is cleaned .
Light the gas fireplace and allow it to burn on high heat for a couple of hours .
The fireplace surface may emit a slight odour and a little smoke – this will quickly disappear and will only
happen when the fire is lit for the very first time . Ensure that the room is well ventilated during this time .
Children and pets should be kept away from the fireplace during this process . Please exercise caution
during this process: do not touch visible surfaces/glass, as these will become very hot .
The fireplace can also emit a “clicking” sound when heating up and cooling down . This is due to the large
temperature differences that the material is exposed to .
If the fireplace has not been used for a longer period of time, follow the procedure for lighting the fire for
the very first time .
Manual extinguishing of the fire
To extinguish the gas fireplace manually (e .g . if you cannot find the remote control or the remote control
has no batteries) shut off the gas supply .
NB!
Ventilate the room when you light the fireplace for the very first time . The fireplace may emit a little
smoke and a slight odour when it is lit for the first time .
58 - GB
GB