RAIS Nexo 100, Installation Manual

Page: 52 / 94

REMOTE CONTROL AND RECEIVER
Remote control
In this section you can learn how to set up the remote control for the gas fireplace . See the separate user
manual for how to use the remote control .
INSERTING BATTERIES IN THE REMOTE CONTROL
The remote control uses 2 x AAA 1 .5 V batteries .
When using the fireplace for the first time in the year, you should replace
the batteries .
Replace all of the batteries at the same time . Use only good quality
alkaline batteries .
Never use pointed tools to remove the batteries from the box .
Synchronisation of the remote control and receiver
You must first synchronise the remote control and fireplace receiver in order for the remote control to
function . Procedure to synchronise the remote control and receiver:
Press and hold in the receiver “reset” button
until you hear short ‘beep’ followed by a long ‘beep’ .
Release the button .
You now have 11 seconds to press the arrow down
button on the remote control . Hold the button in until you hear a short “beep” from the receiver . You will
know see the world “conn” on the remote control .
The receiver and remote control are now synchronised .
Remote control and receiver
The following electronic parts accompany this gas fireplace:
Receiver
Remote control
52 - GB
GB