7
10. Install the Brine Safety Float
• Insert the brine well into the brine tank ( see figure 7.1)
• Attach the brine well to the brine tank with the overflow elbow.
( see figure 7.2)
• Insert the safety float into the brine well. The top of the safety float
should be about 5 inches from the overflow elbow (
see Figure 7.3
).
11. Install the Brine Line
• Slide the brass compression nut over the end of the brine line,
followed by the ferrule and tube support. Attach the brine line to
the brass fitting on the right side of the valve (
see Figure 8
).
• Insert a tube support into the other end of the brine line and push
the brine line into the brine safety float elbow. Use a locking clip
to secure the connection (
see Figure 8
).
FIGURE
FIGURE 7.2
FIGURE 7.3
FIGURE 7.4
FIGURE 7.5
7.1
!
Important Note: Not Applicable for EC5-
CAB models.
Figure 7
Figure 8
!
Important Note for EC5-CAB
Models: The overflow elbow is
located on the back of the brine
cabinet tank (not shown).
!
Important Note: Not Applicable for EC5-
CAB models.
!
Important Note: The brine over-
flow line must not be higher than
the overflow elbow on the brink
tank. (This is a gravity overflow.)
This line is used only when other
overflow valves fail.
Summary of Contents for EC5 Series
Page 22: ...22 Control Exploded View 1 5 3 4 4 6 11 7 8 8 10 9 14 2 15 12 13...
Page 42: ...Notes...
Page 43: ...43 Notes...
