7
LEVEL 1 USER PROGRAMMING
STEP 1 : Setting Current Time
STEP 2 : Setting Current Date & Exit Level 1 Programming
LEVEL 2 USER PROGRAMMING
Press and hold “
UP AND DOWN”
together
for three seconds to enter Level Two Master Programming.
The following chart indicates choices and default settings.
Note:
Default settings are indicated in
bold letters
NOTE : Use same programming method as you used in level 1 to advance and/or change values
.
Parameter
Option 1
Option 2
Option 3
Option 4
Comments
1
System Language
English
Spanish
French
Set to French if desired. Spanish not
enabled
2
Valve Operation
Softener
Filter
Iron
Filter
Leave at default setting
3
Regeneration
Mode
Meter
Delayed
Meter
Override
Calendar
Clock
Meter
Immediate
Leave at default setting
4
Regeneration Time
12:00 AM
The unit is factory set to backwash at 2:00 AM on the day of backwash. You can
change to another time if desired.
5
Regeneration Days
3 Days
Leave at default setting. Before changing this value, contact Rainfresh
6
Backwash
10
Leave at default setting
7
Rapid Rinse
5
Leave at default setting
8
Restore Default
NO
Leave at default. Change only if you want to re-start programming from start
Press “
MENU” for 3 seconds
to unlock screen. Press “
MENU” again and the hour
value becomes highlighted
Press “
SET/REGEN”
once again and the
highlighted value
flashes.
Now press “
or
UP OR DOWN”
arrows to change
the hour values.
Press “
SET/REGEN”
again to accept the hour
value and advance to
change the minute value
Press “
or
UP OR
DOWN” arrows to
change the minute value
Press “
SET/REGEN”
again to accept the
minute values and
advance to adjust the
AM/PM values
Press “
or
UP
OR DOWN” to
change the AM/PM
value
Press “
SET / REGEN”
again to accept the AM/PM
value. Highlight stops
flashing.
Continue to Step 2
From Step 1
Press “
DOWN” arrow to
advance to CURRENT DATE
Press “
SET/REGEN”
once and the MONTH
value flashes
Now press “
or
arrows to
change the month
to current month
Press “
SET/REGEN”
again to accept the month
and advance to change
the DATE
Press “
or
arrows to
change the DATE.
Press “
SET/REGEN”
again to accept the
DATE and advance to
set current YEAR
Press “
or
to
change the YEAR
Press “
SET / REGEN”
again to accept the YEAR.
Highlight moves back to
MONTH and stops flashing.
Press
DOWN
arrow to advance to
VACATION MODE
Press
DOWN
arrow to exit
programming mode
