RainbowAstro RST-300, User Manual

Page: 42 / 102

30
Initial setting
Describes the basic setup you should know before observing.
GPS
When the mount is turned on, the built-in high-performance GPS receiver receives
signals from up to 12 GPS satellites and automatically receives the current position.
It will take about one minute to receive your current location, and GPS information will
not be received indoors. If you do not receive GPS information outdoors, there is a factor
that interferes with the GPS signal. Enter the location and time (Date & Time) manually.
To check received GPS information, follow the steps below.
1
In Main mode, press the 7 MENU key.
2
Use the ▲ and ▼ arrow keys to move
to the
GPS menu.
3
Press the ENT. key to select the GPS
menu.
4
When a GPS signal is received, the
time, latitude and longitude are
displayed on the screen. If latitude
and longitude are not displayed, the
satellite signal has not yet been
received.
Rainbow RST135
V.190411
Equatorial Mode
Auto Resume Off
Reticle ill.
View angel
Voltage & Temp
* GPS
Time= 11:44:40.0
Long= 127
°
24'21.3
Lati= 36
°
24'12.5
High= 105m Sat= 4