background image

 

14 

 

Drawing 2-8 First screen (deep sky)

 

Table 2-8 Explanation of each item on the first screen (deep sky)

 

Items

 

Explanation

 

NGC 224 

Displays the NGC number.

 

S:0178.0 

Displays the apparent size.

 

T:Galaxy 

Displays the type.

 

M:03.5 

Displays the apparent magnitude.

 

D:Extrem Bright 

Displays features.

 

M31 

Displays the messier number.

 

If there is no messier number, it will not be displayed.

 

Andromeda Galaxy 

The name is displayed.

 

 

The first screen of the star information and the description of each item are as follows.

 

 

Drawing 2-9 First screen (star)

 

Table 2-9 Explanation of each item on the first screen (star)

 

Items

 

Explanation

 

BSC 0898 

The BSC (Bright Star Catalog) number is displayed.

 

Mag:+04.2 

Displays the apparent magnitude.

 

Mult St:2 

If double star, the number of stars is displayed.

 

If it is not double star, it is not displayed.

 

NGC 224    S:0178.0' 

T:Galaxy      M:03.5 

D:Extrem Bright M31 

Andromeda Galaxy 

BSC 0898  Mag:+04.2 

Mult St:2    

Sep:0008.3"   Md:1.1 

Acamar      Eri-The2 

Summary of Contents for RST-300







































































































Reviews: