Section 2 – Installation
8
2.4 Mount Feeder and Connect to Electrical Supply
Mount the
Chemflo
controller on a sturdy wall or post using minimum 3mm or 1/8” stainless steel
bolts, screws or masonary anchors.
The
Chemflo
controller MUST be installed in a sheltered location.
Connect the
Chemflo
into a suitable power outlet and the Pool Pump into the piggy-back power
plug.
The power outlet should be fitted with an electronic Timer, which will switch the
Chemflo
and the
main Pool Pump on for the correct amount of time each day.