Section 1 – Introduction
4
Section 1. – Introduction
Thank you for purchasing a
Chemflo
feeder.
The
Chemflo
dosing unit is designed for maximum reliability to give you many years of service.
The
Chemflo
is easy to operate. This manual provides all the details required for correct
installation and operation of the unit. If at any stage you require assistance, please contact your
local dealer.
Please note that the
Chemflo
must be serviced or repaired by authorised personnel only. Opening
the unit by unauthorised persons may cause an electrical shock, resulting in serious injury or
death. If the power lead becomes damaged, the unit must be returned to your dealer or repaired by
an authorised person only.
1.1 Chemflo Diagram
1.
Dosing Pump
.................... This can be used for either Chlorine or Acid.
2.
LED Display
...................... The display provides a visual indication of the dosing rate.
3.
Dose Rate Control
............ Set the control to add more or less chemical, turn dosing
OFF or allow the pump to operate continuously (eg. for
pool start-up or super-chlorinating).
4.
Piggy-back power Plug
... Plug this into a 240V AC power outlet which is controlled
by a timer. The main pool pump then plugs into the piggy-
back plug. This ensures that the
Chemflo
only adds
chemical when the main pool pump is on.
