Rain Bird WR2, User Manual

Page: 8 / 104

6
WR2 Wireless Sensor
tXXXSBJOCJSEDPN83
Temperature Set Point
(Rain/Freeze Sensor only)
Programming Irrigation
Modes
Programming the Set Points
5IF838JSFMFTT4FOTPSBMMPXTUIFDPOUSBDUPSUP
FTUBCMJTISBJOGBMMBOEUFNQFSBUVSFTFUQPJOUTBQQSPQSJBUF
GPSMPDBMFOWJSPONFOUBMBOETPJMDPOEJUJPOT"MUFSOBUFMZ
the contractor may elect to use the “Standard Setting”:
UFNQFSBUVSF¡' ¡$SBJOGBMMžw NNBOEiQSPHSBNNFE
irrigation” mode. The ”Standard Setting” is programmed at
the factory and is active after successful pairing.
Rainfall Set Point
1VTIMFGUPSSJHIUBSSPXPO
keypad to navigate to the
Rainfall Indicator icon.
2. When the Rainfall Indicator
JDPOøBTIFTQSFTTUIF
+
/
–
CVUUPOPOUIFLFZQBEUPTFU
programming details. Each
QSFTTPGUIFCVUUPOBEKVTUTUIF
set point. Select from six (6) set
points ranging from 1/8” (3mm)
to 1/2” (13mm).
1SFTTUIFMFGUPSSJHIUBSSPXUP
accept programming details
and to navigate to next icon.
5
6
5. The Sensor is successfully paired to the Controller
*OUFSGBDFXIFOUIFi4FOTPS*OEJDBUPS1BJSJOH4UBUVTwJDPO
TUPQTøBTIJOH0ODFQBJSFETFOTPSTJHOBMTUSFOHUIBOE
CBUUFSZMJGFBSFDPNNVOJDBUFEWJBUIF$POUSPMMFS*OUFSGBDF
JDPOT"EEJUJPOBMMZBCMJOLJOHMJHIUPOUIFCPUUPNPG
the Sensor indicates signal strength for 20 minutes
JNNFEJBUFMZGPMMPXJOHTVDDFTTGVMQBJSJOH5IFTFiTFMGUFTUw
features are an indication that your WR2 Wireless Sensor is
operational.
1VTIMFGUPSSJHIUBSSPXPO
keypad to navigate to the
Temperature Indicator icon.
2. When the Temperature
*OEJDBUPSJDPOøBTIFTQSFTTUIF
+
/
–
CVUUPOPOUIFLFZQBE
to set programming details.
Select one of three temperature
TFUUJOHT¡' ¡$¡' ¡$
or 41°F (5°C).
1SFTTUIFMFGUPSSJHIUBSSPXUP
accept programming details
and to navigate to next icon.
1VTIMFGUPSSJHIUBSSPXPO
keypad to navigate to the
Irrigation Mode icon.
2. When the Irrigation Mode icon
øBTIFTQSFTTUIF
+
/
–
CVUUPOPOUIFLFZQBE
to set programming details.
Manually set one of three
irrigation modes. See Irrigation
Modes.
1SFTTUIFMFGUPSSJHIUBSSPXUP
accept programming details
and to navigate to next icon.