![background image](http://html1.mh-extra.com/html/rain-bird/iq/iq_installation-and-user-manual_3427686022.webp)
18
IQ Network Communication Cartridge
Internal Antenna Installation
Cellular (NCC-GP) and WiFi (NCC-WF) cartridges require
installation of an internal antenna (if not using LXMM). To
install the internal antenna(s):
A
Clean surface to remove any dust or dirt.
B
Remove the adhesive backing cover strip from the
GPRS Cellular or WiFi internal antenna.
C
Place antenna in close proximity to back-plane as
shown, to allow ample clearance for the front panel to
close without pinching the antenna cable.
WARNING:
To comply with FCC RF safety exposure
limits, the antenna used for this transmitter must be
installed to provide a separation distance of at least
20 cm from all persons and must not be located or
operating in conjunction with any other antenna or
transmitter.
d
CAUTION:
Take special care the first time when
placing the antenna. Once installed it cannot be easily
removed again.
NOTE:
Internal antennas must be installed in a vertical
position as shown to ensure maximum signal strength.
Back-plane
GPRS Cellular
Antenna
GPRS Cellular Internal Antenna Installation