Rain Bird ESP-TM Series Installation, Programming, & Operation Download Page 7

Oslostrasse 5, CH 

 4023 Basel

Tel. +41 [0]61 333 70 33, Fax +41 [0]61 333 70 32

www.easyrain.net   [email protected]

Brunner Bewässerung - Arrosage

Gebrauchsanweisung Steuerung ESP-TM 

7

Set  Current  Time

Turn  the  dial  to  "HR."

The  display  shows  the  hour  that  is  currently  set,

either  AM  or  PM.

Press              or              to  set  the  current  hour.

Turn  the  dial  to  "MIN."

The  display  shows  the  minute  currently  set.

Press              or              to  set  the  current  minute.

                                                                                                                                                                           

1

2

3

4

5

6

ESP-TM  Installation  and  Operation                                                                                                                                                                                           

Page  11

Set  Current  Day

Setting  the  current  day  varies  somewhat  depending  on

whether  you  are  using  a  custom  schedule  or  a  fixed

schedule.

Custom  Schedule

Make  sure  the  Schedule  Slide  switch  is  set  to  "C."

Turn  the  dial  to  "DAY."

The  display  shows  the  day  of  the  week  that  is

currently  set  (for  example,  "MO"  for  Monday).

Press              or              to  change  the  display  to  the  current

day  of  the  week.

3

2

1

4

ESP-TM  Installation  and  Operation               

Page  12

All manuals and user guides at all-guides.com

Summary of Contents for ESP-TM Series





















Reviews: