Rain Bird 4012-22, User Manual

Page: 9 / 104

WR2 Wireless Sensor
tXXXSBJOCJSEDPN83 7
Press
+
and
–
CVUUPOT
TJNVMUBOFPVTMZGPSöWF TFDPOET
PSVOUJMUIFTDSFFOHPFTCMBOL
8IFOJDPOTSFBQQFBSDPOUSBDUPS
default settings are restored.
Press the
–
BOEMFGUBSSPX
CVUUPOTTJNVMUBOFPVTMZ
GPSöWF TFDPOETPSVOUJM
UIFTDSFFOHPFTCMBOL
to cancel the Contractor
default setting and restore
the ”Standard Setting”:
UFNQFSBUVSF¡' ¡$
SBJOGBMMžw NNBOE
“programmed irrigation”
NPEF8IFOJDPOTSFBQQFBS
”Standard Setting” is active.
Restore Contractor Default Settings
*GUIJTQSPHSBNNJOHJTJOBEWFSUFOUMZDIBOHFEJUJTTJNQMFUP
restore.
Restore Standard Setting Saving, Resetting and
Restoring Settings
Save Contractor Default Settings
Reset Contractor Default Settings
The Contractor default setting stores programming details
related to rainfall and temperature set points.
3FTFUBOETBWFQSPHSBNNJOHEFUBJMTJOBDDPSEBODFXJUI
Section
5
and
7
.
Once the Controller Interface
JTDPNQMFUFMZQSPHSBNNFE
QSFTTBOESJHIUBSSPX
CVUUPOTTJNVMUBOFPVTMZ
for five (5) seconds to save
contractor default setting. All
QSPHSBNNFEJDPOTXJMMøBTI
in unison one time to indicate
program is saved.
7
Select the Sensor Location
The communication range for the WR2
Wireless Sensor is 700 feet (213.4 meters).
t "CMJOLJOHMJHIUPOUIFCPUUPNPGUIF4FOTPSJOEJDBUFT
TJHOBMTUSFOHUIGPSNJOVUFTJNNFEJBUFMZGPMMPXJOH
successful pairing. The Sensor updates its signal
TUSFOHUIFWFSZTFDPOET JFCMJOLSFMJBCMFTJHOBM
TUSFOHUITFSJFTPGCMJOLTTUSPOHFTUTJHOBMTUSFOHUI
*GUIFTJHOBMTUSFOHUIJTOPUPQUJNVNJOPOFMPDBUJPOUSZ
BOPUIFSMPDBUJPO&WFOBTMJUUMFBTBGFXGFFUEJòFSFODFJO
placement can improve signal strength.
t 4FMFDUBNPVOUJOHMPDBUJPOXIFSFUIFSBJOTFOTPS
XJMMSFDFJWFEJSFDUSBJOGBMM.BLFTVSFUIFTFOTPS
FYUFOETCFZPOEUIFSPPGMJOFUSFFMJNCTBOEBOZPUIFS
PCTUSVDUJPOT*OTUBMMUIF3BJO4FOTPSJOBOBSFBUIBU
receives as much rain and sunlight as the landscape. Be
TVSFUPNPVOUUIFTFOTPSBCPWFTQSBZGSPNUIFTQSJOLMFST
Signal Sensor LED
GOOD
Install
1-4 Blinks
POOR
DO NOT install
Does not blink
8