Railway Equipment 934, Operating Manual

Page: 27 / 62

P/N R9340-0104 27 © 2010 RAILWAY EQUIPMENT CO.
REV B
5/11
J. SELECT RUN TIMER PULSE MODE:
The choices are on or off, factory default is off. When on is
selected a pulse will start run time sequence and continue until run
timer has timed out. When off is selected run timer will time as
long as remote is on, when remote on is removed blower will stop.
K. SELECT F OR C
This parameter allows selection of Fahrenheit or Celsius
Temperature display.
4.
FACTORY DEFAULT:
Factory default is used to place all parameters back to factory default settings. To
enable factory default settings rotate selector dial while this menu item is
displayed. All settings will return to factory default settings.