Rail King UNION PACIFIC 4-6-2 49er Operating Instructions Manual Download Page 36

Page: 36 / 36

RAILKING

SERVICE & WARRANTY INFORMATION

HOW TO GET SERVICE UNDER THE TERMS OF THE
LIMITED ONE YEAR WARRANTY

For warranty repair, do not return your product to the place of purchase. Instead, follow the

instructions below to obtain warranty service as our dealer network is not prepared to service

the product under the terms of this warranty.

1. First, write, call or FAX MTH Electric Trains, 7020 Columbia Gateway Drive, Columbia,

MD 21046, 410-381-2580 (FAX No. 410-381-6122), stating when it was purchased and what

seems to be the problem. You will be given a return authorization number to assure that your

merchandise will be properly handled upon its receipt.

2. CAUTION: Make sure the product is packed in its original factory packaging including its

foam and plastic wrapping material so as to prevent damage to the merchandise. The shipment

must be prepaid and we recommend that it be insured. A cover letter, including your name,

address, daytime phone number, Return Authorization number, a copy of your sales receipt

and a full description of the problem, must be included to facilitate the repairs. Please include

the description regardless of whether you discussed the problem with one of our service

technicians when contacting MTH for your Return Authorization number.

3. Please make sure you have followed the instructions carefully before returning any

merchandise for service.

LIMITED ONE YEAR WARRANTY

This item is warranted for one year from the date of purchase against defects in material or

workmanship. We will repair or replace (at our option) the defective part without charge for

parts or labor, if the item is returned to the address below within one year of the original date

of purchase. This warranty does not cover items that have been abused or damaged by careless

handling, light bulbs or traction tires. Transportation costs incurred by the customer are not

covered under this warranty.

This warranty gives you specific legal rights and you may have other rights which vary from

state to state.

ProtoSound®s® is a trademark of MTH Electric Trains. DCRU® is a registered copyright of

QS Industries, Inc.

Lionel® is a registered trademark of Lionel L.L.C.. Railsounds® is a registered trademark of

Lionel L.L.C.

Summary of Contents for UNION PACIFIC 4-6-2 49er





































Search results

Summary of Contents for UNION PACIFIC 4-6-2 49er

Reviews:

Related manuals for UNION PACIFIC 4-6-2 49er

Brands by name

Popular brands

Rail King UNION PACIFIC 4-6-2 49er, Operating Instructions Manual

Search results

Summary of Contents for UNION PACIFIC 4-6-2 49er

Reviews:

Related manuals for UNION PACIFIC 4-6-2 49er

Brands by name

Popular brands