24
RailKing U.P. 49er Operating Manual
RAILKING
entitled Using RESET To Program ProtoSounds® on page 18). Once in
Feature 40, press the transformer whistle button and wait for ProtoSounds®
to sound a bell ding. Continue pressing the whistle button until
ProtoSounds® sounds two bell dings signifying that the Remote Lockout
Control has been selected. To lock in the setting, simply turn the throttle all
the way off and then back on again.
To turn the Remote Lockout Control
setting back off, go back to Feature 40 and press the whistle button until
only one bell ding sounds. To lock in the setting, simply turn the
transformer throttle off and then back on again. Alternatively, you can go
to RESET Feature 18 to reset all ProtoSound® features back to their
original factory defaults including Remote Lockout Control.
RESETTING ALL PROTOSOUND® OPTIONS TO
FACTORY DEFAULTS
ProtoSounds® is equipped with a RESET feature (Feature 18) that resets
all programmable options back to their original factory settings. This is a
useful feature if you find your engine not operating the way you think it
should and don’t want to take the
time to check each RESET
feature one at a time. To reset all
the RESET features back to their
original factory settings, enter
RESET and go to Feature 18.
(See the section entitled Using
RESET To Program
ProtoSounds® on page 18).
Once in Feature 18, press the
transformer whistle button and wait for ProtoSounds® to sound a garbled
bell sound, then interrupt the transformer throttle to enter the forward phase.
Clank,
Clank,
Etc.
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
18 Times
Listen For 3 Clank
And 3 Clink Sounds
Push The Whistle Button
Until You Hear
A Warbled Bell Ding
Interrupt The Throttle
To “Lock-In”
The Default Setting
H
