Operator’s Manual
© Copyright 2018 - Rail-Ability Limited
Page
9
of
70
Conversion
6 Safety Rules
DANGER. FAILURE TO OBEY THE INSTRUCTIONS AND SAFETY RULES
IN THIS MANUAL MAY RESULT IN DEATH OR SERIOUS INJURY.
6.1 General
•
Read, understand and obey all applicable governmental regulations.
•
Read, understand and obey the employer’s safety rules and worksite regulations.
•
Comply with the employer’s, job site and governmental rules regarding use of personal protective
equipment.
•
Read, understand and obey the manufacturer’s instructions and safety rules, safety and
operator’s manuals and machine decals.
•
Learn and practice the principles of safe machine operation contained in t
his operator’s manual.
•
Be properly trained to safely operate the machine.
•
The machine must only be operated from the seated position in the cab with the seat belt
fastened
•
Always obey national traffic regulations while driving the machine on roads. Be aware of the
machine
’s overall length, width and height.
•
Avoid hazardous situations.
•
The lack of maintenance may cause damage or hurt people.
•
Know and understand the safety rules before going on to the next items:
•
Prior to use:
•
Always perform Pre-Operation Actions
•
Always perform Function Tests
•
Always perform a Workplace Inspection.
•
Only use the machine as it was intended
•
Do not engage in stunt driving or misbehave while operating the machine.
6.2 PPE
Under normal use, the following Personal protective equipment is required:
•
Toe Protector Safety Boots
•
Full Hi Viz Orange overalls
•
Gloves (Not required in the cab)
•
Hard Hat (Not required in the cab).
Risk assessments of specific site conditions may mandate additional PPE.
6.3 Electrocution Hazards
•
This machine is
NOT
electrically insulated and will
NOT
provide protection from contact with or
proximity to electrical current.