Raider RD-CM08, User Manual

Page: 12 / 70

12 www.raider.bg
control of the power tool in unexpected situations.
1.3.6. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving
parts.
1.3.7. If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust-related
hazards.
1.4. Power tool use and care.
1.4.1. Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
1.4.2. Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
1.4.3. Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
1.4.4. Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
1.4.5. Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained power
tools.
1.4.6. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
1.4.7. Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be performed. Use
of the power tool for operations different from those intended could result in a hazardous
situation.
1.5. Service.
1.5.1. Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
1.6. Safety Warnings for Cut-off Grinder.
1.6.1. Never stand on the power tool. Serious injuries could occur when the power tool tips
over or when accidentally coming into contact with the cutting disc.
1.6.2. Make sure that the guard operates properly and that it can move freely. Never lock
the guard in place when opened.
1.6.3. Use the power tool only for dry cutting. Water penetrating into a power tool increases
the risk of an electric shock.
1.6.4. Keep the mains cable away from rotating application tools. The mains cable can be
cut through or get caught.
1.6.5. Keep the handle dry, clean and free from oil and grease.
1.6.6. Keep hands away from the cutting area while the machine is running. Danger of
injury when coming into contact with the cutting disc.
1.6.7. Do not stand in a line with the cutting disc in front of the machine. Always stand
aside of the cutting disc. This measure provides for better protection of your body against
possible splinters in case of cutting disc breakage.
1.6.8. Never remove cutting remainders, metal chips, etc. from the cutting area while the
machine is running. Always guide the tool arm back to the neutral position first and then
switch the machine off.
1.6.9. Guide the cutting disc against the work piece only when the machine is switched on.
Otherwise, there is danger of kickback, when the cutting disc becomes wedged in the work
piece.
1.6.10. Operate the power tool only when the work area to the work piece is clear of any