Raider RD-CM08, User Manual

Page: 10 / 70

10 www.raider.bg
Original instructions for use
Dear Customer,
Congratulations on the purchase of machinery from the fastest growing brand of electric
and pneumatic tools - RAIDER. When properly installed and operating, RAIDER are safe and
reliable machines and work with them will deliver a real pleasure. For your convenience has
been built and excellent service network of 40 service stations across the country.
Before using this machine, please carefully acquainted with these “instructions’ manual”.
In the interest of your safety and to ensure proper use and read these instructions carefully,
including the recommendations and warnings in them. To avoid unnecessary errors and
accidents, it is important that these instructions will remain available for future reference
to all who will use the machine. If you sell it to a new owner “Instructions’ manual” must
be submitted along with it to enable new users to become familiar with relevant safety and
operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and
owner of the trademark RAIDER.
Address: Sofia City 1231, Bulgaria “Lomsko shausse” Blvd. 246, tel 02 934 33 33, 934 10 10,
www.raider.bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008
with scope of certification: Trade, import, export and servicing of hobby and professional
electrical, mechanical and pneumatic tools and general hardware. The certificate was issued
by Moody International Certification Ltd, England.
Technical Data
parameter unit value
Model
-
RD-CM08
Rated voltage V 230
Frequency Hz 50
Rated power input W 2 400
No-load speed min
-1
3 700
Mounting hole diameter mm 25.4
Cutting disc diameter mm 355
Soft starting - Yes
Sound pressure level LpA dB(А) 95
Sound power level LwA dB(А) 108
Vibration emission value a
h
m/s
2
5.16
Клас на защита на електроизолацията - II
Maximum cut at 45 ° mm 45
Protection class - II
The numbering of the components shown refers to the representation of the power tool on
the graphic pages.
EN