Raider NSN 3HD 2805-01-652-3076, Owner'S Manual

Page: 76 / 78

Raider 50 HP Appendix Alfa
Owner’s Manual Post Operations Checks
66
P
OST
O
PERATIONS
C
HECKLIST
Motor Serial
Number:
Motor Hours:
Date of
Operation:
Complete the checks listed in the post-operational checklist. The post-operational checklist is designed
to ensure all systems are secured properly and the boat is prepared for future missions.
Post Operations Checks
Completed
(initial)
a.
Fresh water wash-down
(Salt-Away is
recommended)

Wash the exterior of the motor with fresh water.

Remove the motor cowling and fresh water wash the
powerhead.
 After submersion period ensure fresh water is forced under
the flywheel and Recoil Starter.

After submersion fully extend the Recoil Starter Line/Rope
and wash with fresh water.
a.
b. Fresh water motor flush

Attach “ears or flush connector” to lower unit. Operate the
engine for approximately five (5) minutes at full operating
temperature.

After submersion period the motor must be run at
operating temperature for no less than 30 minutes to
ensure all water is removed from the head.
 Disconnect the fuel supply and let the motor run itself dry.
b.
c. Wipe down

Use LP air or dry cloth to remove excess water from
exterior and interior surfaces of the motor.

After submersion use LP air to remove water and moisture
under the Flywheel and Recoil Starter.
c.
d.
Corrosion Prevention

Spray the Powerhead with a liberal coat of Anti-Corrosion
Spray penetrant/lubricant or equivalent.
 Spray 6 & 1 Penetrating Lubricant or equivalent under the
flywheel.
d.
e. Battery Maintenance

Unplug or remove battery – place on battery tender to
maintain charge.
e.
f. Air Dry

Leave the upper cover off, when possible to allow the
powerhead and other components to air dry.
f.