Raider NSN 3HD 2805-01-652-3076, Owner'S Manual

Page: 52 / 78

SECTION 3
Owner’s Manual Maintenance Requirements
42
T
ACH
/H
OUR
M
ETER
Monitors motor RPM while operating, tracks and displays Total Operating Time (TOT) for the purpose of
scheduling and adherence to service intervals as recommended in this section. More stringent intervals
may be required based on multiple submersions, heavy fuel use, operating conditions or personal
experience.
Operational menu’s may be cycled through by pressing the select button. Press and hold the select
button to initiate a change within each menu. When menu header begins to flash, the select button is
used to enter desired setting. Once input is complete, the unit will return to default display setting after
a few seconds.
Timing System

TOT: Accumulates motor total hours, non-resettable

JOB: Records partial motor operating time, resettable

SVC: May be set between 5- and 50-Hours countdown
based on user requirements or service intervals. When
time is reduced to zero 0.0 “SVC” will flash, indicating
required service action. Default setting is 5 hours.

SVC2: May be set between 10- and 250-Hours countdown
based on user requirements or service intervals When
time is reduced to zero 0.0 “SVC2” will flash, indicating
required service action. Default setting is 10 hours.
Real – Time Display

RPM: When the motor is started the LCD, real-time
display will indicate motor RPM.

MAX RPM: Will record motors maximum RPM within an
operational cycle. When motor is secured the MAX RPM
may be viewed at any time. When the motor enters the
next operational cycle, the previous reading will be
replaced.
Engine Type Setting

Factory setting is 2P1r