Rae Q-RAE, Operation And Maintenance Manual

Page: 76 / 170

PROGRAMMING
4 - 28
4.7.1 Change Site ID
The user can enter an 8 digit alphanumeric site ID in the
programming mode. This site ID will be included in the
datalog report.
1. “Change Site ID?” and “Change User ID?” are the first
and second sub-menu item in Table 4.6.
2. Press [MODE] key to choose one of them and press the
[Y/+] key, the display shows the current site ID: “Site
ID = xxxxxxxx” or the current user ID: “User ID =
xxxxxxxx” with the left most digit flashing.
3. Press the [Y/+] or [N/-] key to cycle through all 26
letters and 10 numerals. Press [MODE] key
momentarily to advance to the next digit. The flashing
digit will move to the next digit to the right. Repeat
this process until all 8 digits of the new site ID are
entered.
4. Press and hold the [MODE] key for 1 second to exit the
data entry mode and move to the next monitor setup
sub-menu.
5. If there is any change to the existing site ID, the display
shows “Save?” Press the [Y/+] key to accept the new
site ID and exit the monitor setup sub-menu. Press the
[N/-] key to discard the changes and move to the next
sub-menu.