AutoRAE Lite User’s Guide
35
9.6.5 Configuring Multiple ToxiRAE 3 Monitors
With the AutoRAE Lite Utility Program in Administrator Mode, you can set new parameters in as
many ToxiRAE 3 monitors as you want, allowing uniform configuration of many ToxiRAE 3
monitors.
1.
Place a ToxiRAE 3 in the dock.
2.
Click “Set.” Parameters are transferred to the ToxiRAE 3 automatically.
3.
Remove the ToxiRAE 3.
4.
Place another ToxiRAE 3 in the dock.
5.
Press “Set.”
If the parameters are successfully transferred, you see this dialog box:
6.
Repeat this process as many times as you want.
Note:
If there is an error in the data transfer to any ToxiRAE 3, you see this message:
Check the parameter settings and cable connections, and try again.
Important!
If the problem persists, refer the ToxiRAE 3 to qualified service personnel. Do not
place it into service.
